CNC Gantry Movable High Speed Drilling Machine
Basic Info
Model No.: TPHM3016
Product Description
Applicable Industry:
Mainly used for drilling, tapping and light milling of square box parts in petrochemical air coolers. Carbide drills can be used for internal cooling high-speed drilling, high-speed twist drills also can be used for external cold drilling.
Product feature:
1. Heavy-load linear roller guide pairs are equipped on two sides of the machine bed respectively. The drive adopts the German Siemens AC servo motor to drive the synchronous belt and the precision ball screw pair to synchronize the drive on both sides.
2. There is a moving slide plate on the gantry, the slide is guided by a high precision linear guide in front of the gantry. AC servo motor is used to drive synchronous belt and precision ball screw pairs. Ensure high accuracy.
3. The vertical lift of the slide carriage is guided by the roller type linear guide rail, AC servo motor is used to drive synchronous belt and precision ball screw pairs. Ensure high accuracy. The drilling head used a special motor for high power spindle to drive the spindle by synchronous belt, step less adjust, low speed high torque, can withstand heavy cutting load, can used carbide drill bit for high speed drilling. The drilling spindle used Taiwan precision inner cooling spindle, the taper is BT50, it has butterfly spring automatic broach pulling mechanism. It is very convenient to change the tool by connecting rod with drill bit or milling cutter, hydraulic cylinder loosing tool.
4. The machine body and gantry are weld assembly with good quality of steel plate, which was high temperature annealed before processing, was annealed again after half finished machining to remove stress, then finished machining so that ensure stable precision.
5. The support plates is installed on the work surface, and a T-shaped groove is opened on the surface, and the groove width is 28 mm, which is convenient for clamping the workpiece.
6. It adopts SIEMENS CNC system with 4 CNC axis, equipped with RS232 interface and LCD screen. Drilling coordinates can realize CAD/CAM direct conversion, and it has the function of hole pre-drilling before real drilling and re-examination, which is easy to operate.
7. Both sides of the worktable are equipped with chip conveyors for automatic chip removal. The machine is water based cooling and with a coolant supply, recovery, and circulation filtration system.10. In order to ensure the reliability of the machine tool, the key parts are imported quality products.
Specifications:
| Parameter Name | Item | Parameter Value |
| Max. size | L X W | 3000X1600mm |
| Max thickness |
| 250mm (The workpiece height Max.320) |
| Work table | Width of T slot | 28/500mm |
| Vertical slide type drill head | Quantity | 1 |
| Main spindle taper hole | BT50 | |
| Max drill diameter | φ50mm | |
| Max.tapping size | M38x2 | |
| Main spindle speed | 30-3000r/min | |
| Motor power of spindle | 22kW | |
| Spindle speed reduction ratio | 1:2 | |
| Distance from the bottom spindle to worktable surface | 300-800mm | |
| (X axis) Gantry longitudinal move
| Max. stroke | 3000mm |
| Moving speed of X axis | 0-8m/min | |
| Servo motor power of X axis | 4.3kW | |
| (Y axis) Power head transversal move
| Max stroke | 1000mm |
| Moving speed of Y axis | 0-8m/min | |
| Servo motor power of Y axis | 3.1kW | |
| (Z axis) Vertical slider feeding | Stroke of Z axis | 500mm |
| Feeding speed of Z axis | 0-5m/min | |
| Servo motor power of Z axis | 3.1kW | |
| Positioning accuracy | X/Y axis | ≤0.1mm/ Full length |
| Repositioning accuracy | X/Y axis | ≤0.05mm |
| Hydraulic system | Hydraulic pump pressure/flow rate | 6.5MPa /25L/min |
| Hydraulic pump motor power | 3kW | |
| Pneumatic system | Compressed air pressure | ≥0.4MPa |
| Chip cleaning and cooling | Chip cleaner type | Plate chain type |
| Chip cleaner no. | 1 | |
| Chip cleaning speed | 1m/min | |
| Chip cleaner motor power | 0.75kW | |
| Motor power of inner cooling water pump | 5.5kW | |
| Automatic lubricating system | Lubrication pressure | 2MPa |
| Lubrication point oil injecting amount | 0.1mL | |
| Lubrication period | 6-10min | |
| Electric system | CNC system | SIEMENS 828 |
| CNC axis NO. | 4 | |
| Whole power of motors |
| Approx. 45kW |
| Overall size | LxWxH | Approx. 6800X5100X3600mm |
| Weight | Approx. 27 T | |
Main Machine
Worktable with clamping devices
Tools that can be used on this machine
Drilling - drill one hole just need 6.6s
Workpiece
FAQ:
Q1. Are you a Manufacturer or a trading company?
A1.We are the manufacture, integrating with design, machining and assembling for angle machine.
Q2. Do you have stock product ready to deliver?
A2. In order to satisfy with the customer for fast delivery, we have certain amount of machines in stock, you can check the machine on LIVE-DEMONSTRATION at any time.
Q3. How do you deliver the finished products?
A3. The machine is mostly delivery by sea, rail way or road for some exception. For some urgent part or shipping document we delivered by air or Express like TNT, FEDEX,DHL,UPS,EMS, Etc.
Q4. How can you guarantee the after-sales service?
A4. We have the special after-sales service department, they will provide training program for operation and trouble shouting during installation. And they will visit the customer regularly for service.
all questions will be answered within 3 hours and 90% problem will be solved within 24 hours.
Q5. What's delivery time for the angle machine.
A5. Within 20 days after payment.
Q6. How can you guarantee your finished angle machine quality?
A6. First, the machine will have 8 hours idle running;
Second, we will test the machine with the material working together.
Product Categories : Drilling Machine > Plate Drilling Machine